Titanium Grade 2 Fasteners Manufacturer & Supplier in India
Titanium Grade 2 fasteners are common where the ability to resist these corrosion effects and a low weight are required. As a commercial grade of titanium (CP), they have nearly 99 per cent titanium with a small percentage of iron and oxygen, providing a good balance of strength, ductility and workability. The tensile strength provided by these fasteners is 345-450 MPa, and these fasteners are applicable in load-bearing and lightweight assemblies in aerospace, marine, chemical, and power sectors.
Titanium Grade 2 fasteners have one significant benefit, which is its superior corrosion resistance, especially in seawater, chlorinated, and mildly oxidising environments. Titanium Grade 2 is more thermally conductive and formable than alloyed grades, such as Grade 5 (Ti-6Al-4V) and Grade 7, and can be more easily machined, welded, and cold-formed. It welds with normal TIG or MIG processes with no preheat or post-weld heat treatment.
Grade 5 fasteners, on the contrary, have an aluminium percentage of approximately 6 and a vanadium percentage of about 4, and this has a big impact on strength and hardness. Grade 5 bolts have tensile strengths of up to 950 MPa (=138 ksi), much higher than Grade 2. Grade 5 fasteners are, however, more expensive than CP Grade 2 because they are composed of alloy. The alloy structure typically consists of approximately 0.25 per cent iron and 0.2 per cent oxygen, which enhance the overall mechanical performance.
Unifit Fastener is a reliable producer and exporter of Titanium Grade 2 bolts, nuts, washers, studs, threaded rod, and custom-designed threaded rod fasteners. The products are all made as per the ASTM B348 / ASME SB348 / DIN 3.7035 standards and sold to desalination plants, offshore, heat exchanger, and power generation units, chemical processing, and aerospace engineering.
Request QuoteTypes of Titanium Grade 2 Fasteners
Titanium Grade 2 fasteners are available in a wide array of types and configurations to suit diverse applications across aerospace, marine, chemical processing and medical industries. Below are the most common types of Titanium Gr 2 fasteners:
- Titanium Gr.2 Structural Bolts
- Titanium Gr.2 Heavy Hex Bolts
- Titanium Gr.2 Hex Bolts
- Titanium Gr.2 Hexagon Head Bolts
- Titanium Gr.2 Machine Bolts
- Titanium Grade 2 T Bolts
- Titanium Gr.2 Eye Bolt
- Titanium Gr.2 Foundation Bolts
- Titanium Alloy Grade 2 J Bolts
- Titanium Gr.2 Button Head Bolt
- Titanium Gr.2 Anchor Bolts
- Titanium Gr.2 Long Bolts
- Titanium Gr.2 Carriage Bolt
- Titanium Gr.2 Elevator Bolt
- Titanium Gr.2 Timber Bolts
- Titanium Gr.2 Square Bolt
- Titanium Gr.2 Metric Bolt
- Titanium Gr.2 Plow Bolts
- Titanium Grade 2 U Bolts
- Titanium Gr.2 Flange Bolts
- Titanium Grade 2 Hex Nuts
- Titanium Gr.2 Heavy Hex Nuts
- Titanium Gr.2 Wing Nuts
- Titanium Gr.2 Hexagon Nuts
- Titanium Gr.2 Cap Nuts
- Titanium Gr.2 Square Nuts
- Titanium Gr.2 Coupling Nuts
- Titanium Gr.2 Hex Jam Nuts
- Titanium Alloy Gr.2 T-Nuts
- Titanium Alloy Gr.2 Eye Nuts
- Titanium Gr.2 Nylock Nuts
- Titanium Gr.2 High Tensile Nuts
- Titanium Gr.2 Cage Nuts
- Titanium Gr.2 Dome Nuts
- Titanium Gr.2 Knurled Nuts
- Titanium Gr.2 Keps-K Lock Nuts
- Titanium Gr.2 Machine Hex Nuts
- Titanium Gr.2 Slotted Nuts
- Titanium Gr.2 Plain Washers
- Titanium Gr.2 Spring Washers
- Titanium Gr.2 Locking Washer
- Titanium Gr.2 Split Washer
- Titanium Alloy Gr.2 Flat Washers
- Titanium Gr.2 Ogee Washers
- Titanium Gr.2 Fender Washer
- Titanium Gr.2 Conical Washers
- Titanium Gr.2 Serrated Washer
- Titanium Gr.2 Tab Washers
- Titanium Gr.2 Hex Washer
- Titanium Gr.2 Countersunk Washer
- Titanium Alloy Gr.2 Dock Washers
- Titanium Gr.2 Spring Lock Washer
- Titanium Gr.2 Star Washer
- Ti Gr.2 Bonded sealing Washer
- Titanium Gr.2 Square Washers
- Titanium Gr.2 Belleville Washer
- Titanium Gr.2 Socket Set Screw
- Titanium Gr.2 Self Drilling Screw
- Titanium Gr.2 Socket Head Cap Screw
- Titanium Gr.2 Hex Head Screws
- Titanium Gr.2 Wood Screw
- Titanium Gr.2 Eye Screw
- Titanium Gr.2 Wing Screw
- Ti Alloy Gr.2 Self Tapping Screws
- Titanium Gr.2 Roofing Screw
- Titanium Gr.2 Phillips Head Screw
- Titanium Gr.2 Decking Screw
- Titanium Gr.2 Machine Screw
- Titanium Gr 2 Thumb Screw
- Titanium Gr.2 Drywall Screws
- Titanium Gr.2 Chipboard Screw
- Titanium Gr.2 Metric Set Screws
- Titanium Gr 2 Sems Screw
- Ti Grade 2 Thread Rolling Screw
- Titanium Gr.2 Full Threaded Stud Bolts
- Titanium Gr.2 Half Threaded Stud Bolts
- Titanium Gr.2 Threaded Rod
- Titanium Gr.2 Double Ended Studs
- Titanium Gr.2 Tap End Stud Bolt
- Titanium Alloy Gr.2 Tie Rods
- Titanium Alloy Grade 2 Studs
- Titanium Gr.2 Single End Stud Bolts
- Ti Gr.2 Reduced Shank Stud Bolt
- Ti Gr.2 Continuous Threaded Stud
- Ti Gr.2 Partial Threads Stud Bolt
- Titanium Gr.2 Heavy Stud Bolts
Send Your Enquiry
Titanium Grade 2 Fasteners Specifications
Unifit Fasteners Inc. produces Titanium Grade 2 fasteners according to ASTM, ASME, DIN, and ISO requirements. These fasteners are made out of high-purity titanium (UNS R50400), which is very easily welded and moderately strong, which means that these fasteners can be applied in both industry and high-performance applications. The standard specification table of our fasteners made of Titanium Grade 2 is as follows:
| Specifications | Details |
|---|---|
| Standard | ASTM B348 / ASTM F467 / ASME SB348 |
| Material Grade | Titanium Grade 2 (UNS R50400) |
| Size Range | M3 to M56 |
| Thread Type | Metric, UNF, UNC |
| Length | 3mm to 200mm |
| Standards Available | DIN, ISO, JIS, BS, ANSI, ASTM, GB |
| Form | Bolts, Nuts, Screws, Washers, Studs, Threaded Rods |
| Finish | Plain, Polished, Pickled, Passivated |
| Tensile Strength | ≥ 344 MPa |
| Yield Strength | ≥ 275 MPa |
| Elongation | ≥ 20% |
| Hardness | ≤ 160 HB |
| Temperature Resistance | Up to 400°C (752°F) |
| Density | 4.51 g/cm³ |
| Melting Point | 1665°C (3029°F) |
Chemical Composition of Titanium Grade 2 Fasteners
Titanium Grade 2 fasteners consist of commercially pure titanium (UNS R50400), which has a high corrosion resistance, high formability, and mediocre strength. Having no heavy alloying elements, they also have high biocompatibility, and can therefore be used in marine, medical, and aerospace applications. Our evidence is to ASTM B348 and ASME SB348.
| Element | Composition (%) |
|---|---|
| Titanium (Ti) | Balance |
| Iron (Fe) | ≤ 0.30 |
| Oxygen (O) | ≤ 0.25 |
| Carbon (C) | ≤ 0.08 |
| Nitrogen (N) | ≤ 0.03 |
| Hydrogen (H) | ≤ 0.015 |
| Other Elements (Each) | ≤ 0.10 |
| Other Elements (Total) | ≤ 0.40 |
Mechanical Properties of Titanium Grade 2 Fasteners
The Grade 2 titanium fasteners have good strength, high ductility, and good heat, stress, and corrosion performances. They find extensive application in aerospace, marine, and chemical applications and also in cold-fitting, their cold-formability enables them to meet precision and custom fastener needs.
| Property | Value |
|---|---|
| Tensile Strength (Min) | 344 MPa (50,000 psi) |
| Yield Strength (0.2% offset) | 275 MPa (40,000 psi) |
| Elongation | 20% |
| Modulus of Elasticity | 105 GPa (15.2 x 10⁶ psi) |
| Hardness (Rockwell B) | 70 – 80 |
| Density | 4.51 g/cm³ |
| Reduction of Area | 30% |
Titanium Grade 2 Fasteners Equivalent Material
Titanium Grade 2, classified under UNS R50400 is a commercially pure titanium alloy widely used in industries ranging from aerospace to marine due to its excellent corrosion resistance and moderate strength. Understanding the equivalent materials in different global standards is essential for ensuring consistency in engineering specifications especially in international projects. Below is a table showcasing the most recognized equivalents of Titanium Grade 2 across global material standards:
| Standard | Designation / Equivalent | Description |
|---|---|---|
| ASTM | B348 (Grade 2), F67 | Specification for titanium bars, forgings, etc. |
| ASME | SB-348 | Boiler and Pressure Vessel Code equivalent |
| UNS | R50400 | Unified Numbering System designation |
| EN / DIN | 3.7035 | European and German equivalent |
| ISO | 5832-2 | Surgical implant material equivalent |
| JIS | T3250 (TP340) | Japanese Industrial Standard |
| BS | 2TA11 | British Standard |
| GOST | VT1-0 | Russian equivalent |
Coating of Titanium Grade 2 Fasteners
Grade 2 Titanium fasteners have a stable oxide layer that will resist corrosion, although in some applications additional finishes will be needed to enhance wear resistance or conductivity. The marine, offshore and chemical environments are the main areas of application of the use of coating as protection is required. The most commonly used coating techniques are:
- Mirror Buffed
- Electro Polished
- Oxidized
- Hot Dipped Galvanizing
- Passivation
- Zinc Plating
- Epoxy Coating
- Teflon Coating
- Chrome Plating
Titanium Grade 2 Stud Bolts Size Chart (DIN 3.7035)
Titanium Grade 2 is known as DIN 3.7035 in Europe and is commonly used in stud bolts due to its resistance to corrosion, low weight and medium strength. These are stud bolts used in chemical, marine, and offshore. A conventional size chart of the DIN 3.7035 Titanium Grade 2 stud bolts in metric measurements is below:
| Nominal Diameter (M) | Thread Pitch (mm) | Length Range (mm) | Standard Nut Size (Across Flats) | Approx. Weight (kg/100 pcs) |
|---|---|---|---|---|
| M6 | 1.0 | 20 – 100 | 10 mm | 0.85 |
| M8 | 1.25 | 25 – 120 | 13 mm | 1.30 |
| M10 | 1.5 | 30 – 150 | 17 mm | 2.10 |
| M12 | 1.75 | 35 – 180 | 19 mm | 3.00 |
| M16 | 2.0 | 40 – 200 | 24 mm | 4.90 |
| M20 | 2.5 | 50 – 250 | 30 mm | 7.80 |
| M24 | 3.0 | 60 – 300 | 36 mm | 11.50 |
| M27 | 3.0 | 60 – 300 | 41 mm | 13.90 |
| M30 | 3.5 | 70 – 320 | 46 mm | 17.30 |
| M36 | 4.0 | 80 – 350 | 55 mm | 25.50 |
Titanium Grade 2 Flat Washer Dimensions
Titanium Grade 2 flat washers evenly distribute the load at the same time giving a very high degree of corrosion resistance and good strength-to-weight ratio. They comply with DIN, ISO, and ASME end-to-end industrial requirements. Standard dimensions according to DIN 125 / ISO 7089 are listed in the table below:
| Washer Size (Nominal ID) | Outer Diameter (OD) | Thickness (mm) | Weight per Piece (grams) |
|---|---|---|---|
| M6 | 12 mm | 1.6 | 1.0 g |
| M8 | 16 mm | 1.6 | 1.6 g |
| M10 | 20 mm | 2.0 | 2.8 g |
| M12 | 24 mm | 2.5 | 4.8 g |
| M16 | 30 mm | 3.0 | 8.2 g |
| M20 | 37 mm | 3.0 | 12.7 g |
| M24 | 44 mm | 4.0 | 19.5 g |
| M30 | 56 mm | 4.0 | 30.6 g |
Titanium Grade 2 Flat Washer Dimensions
Titanium Grade 2 flat washers are precision components designed to distribute the load of threaded fasteners, such as bolts and nuts, while offering excellent corrosion resistance and strength-to-weight ratio. These washers conform to various dimensional standards like DIN, ISO, and ASME, ensuring compatibility with different industrial systems. The table below outlines the standard dimensions of flat washers made from Titanium Grade 2 as per DIN 125 / ISO 7089 specifications:
| Nominal Size (mm) | Inner Diameter (ID) | Outer Diameter (OD) | Thickness (T) |
|---|---|---|---|
| M3 | 3.2 mm | 7.0 mm | 0.5 mm |
| M4 | 4.3 mm | 9.0 mm | 0.8 mm |
| M5 | 5.3 mm | 10.0 mm | 1.0 mm |
| M6 | 6.4 mm | 12.0 mm | 1.6 mm |
| M8 | 8.4 mm | 16.0 mm | 1.6 mm |
| M10 | 10.5 mm | 20.0 mm | 2.0 mm |
| M12 | 13.0 mm | 24.0 mm | 2.5 mm |
| M16 | 17.0 mm | 30.0 mm | 3.0 mm |
| M20 | 21.0 mm | 37.0 mm | 3.0 mm |
| M24 | 25.0 mm | 44.0 mm | 4.0 mm |
| M30 | 31.0 mm | 56.0 mm | 4.0 mm |
Titanium Grade 2 Bolts Weight Chart
Despite their lightweight nature, they offer high tensile strength and excellent corrosion resistance. Understanding their weight per unit helps in project planning and cost estimation, especially for bulk requirements. Below is a reference chart for estimating the approximate weight of Titanium Grade 2 hex bolts based on diameter and length:
| Bolt Diameter (mm) | Length (mm) | Approx. Weight (grams) |
|---|---|---|
| M6 | 20 | 4.5 |
| M8 | 25 | 8.2 |
| M10 | 30 | 13.5 |
| M12 | 40 | 22.8 |
| M16 | 50 | 42.6 |
| M20 | 60 | 68.3 |
| M24 | 70 | 102.7 |
| M30 | 90 | 188.5 |
Why Choose Grade 2 Titanium Fasteners?
Titanium Grade 2 fasteners strike the perfect balance between performance, weight, and corrosion resistance, making them a preferred choice across industries. Here's why they stand out:
- Exceptional Corrosion Resistance: Grade 2 titanium is inherently resistant to corrosion in harsh environments, including saltwater, chlorides, acids, and oxidizing media making it ideal for marine, chemical, and aerospace applications.
- Lightweight Yet Strong: Despite weighing nearly 45% less than steel, these fasteners offer moderate tensile strength (~344 MPa), providing a high strength-to-weight ratio that’s critical in weight-sensitive applications.
- Biocompatibility: Being non-toxic and non-reactive, Titanium Gr 2 is safe for biomedical applications, including implants and surgical equipment.
- High Temperature Tolerance: These fasteners retain mechanical integrity in elevated temperature conditions up to 400°C, making them suitable for heat-intensive environments like power plants and exhaust systems.
- Excellent Formability & Weldability: Titanium Grade 2 offers good cold-forming capabilities and can be easily machined and welded without compromising structural performance, allowing for custom designs and complex assemblies.
- Long-Term Cost Efficiency: Though the initial cost is higher than standard steels, Grade 2 titanium fasteners have lower lifecycle costs due to reduced maintenance, replacements, and downtime.
Applications of Titanium Grade 2 Fasteners
Titanium Grade 2 fasteners are trusted across a wide range of demanding industries for their exceptional strength-to-weight ratio, corrosion resistance, and biocompatibility. Their versatility makes them a preferred choice in environments where both performance and durability are critical.
Areas of Application:
- Aerospace
- Power Generation
- Chemical Processing
- Automotive and Motorsport
- Marine and Offshore
- Oil & Gas Industry
- Desalination Plants
- Pulp and Paper Industry
- Medical and Surgical Equipment
- Heat Exchangers and Condensers
Titanium Grade 2 Fasteners Price
By installing Titanium Grade 2 fasteners, you are not purchasing hardware, you are choosing legendary dependability in critical applications. Although prices of these fasteners may vary with the type of product, size, finish and quantity ordered, the long-term performance of such fasteners can be considered as a viable solution to the overall cost in the long-term.
The lightweight strength, corrosion resistance and the use in hostile environments make Titanium Grade 2 to have a very good value proposition. The pricing structure can be affected by customization, precision machining and international compliance as well.
It is always better to get a quote on your project depending on your specifications such as quantities, specifications and delivery schedules to ensure that you get the best values on your project. Your suppliers are also trusted and can advise you on how to maximize on cost when making bulk or recurring orders.
Trusted Manufacturer & Supplier of Titanium Grade 2 Fasteners
When precision, performance, and trust matter, top industries turn to us. As a leading manufacturer and global supplier of Titanium Grade 2 fasteners, we deliver engineering excellence backed by years of metallurgical expertise and customer-first reliability.
Our manufacturing is powered by advanced CNC technology, strict process control, and in-house labs that ensure every fastener meets global benchmarks like ASTM B348 and DIN 3.7035. Whether it’s hex bolts for marine applications or stud bolts for high-stress aerospace assemblies, each piece is built to perform under pressure literally.
With a robust inventory and scalable production, we support urgent and large-scale requirements with ease. Our supply network spans key markets across the globe, making us a preferred partner for EPC contractors, OEMs and critical infrastructure projects.
What sets us apart? Consistent quality, zero compromise on standards, and a commitment to delivering more than just products - we deliver peace of mind.
Frequently Asked Questions About Titanium Grade 2 Fasteners
1. What are the key benefits of using Titanium Grade 2 fasteners?
Titanium Grade 2 fasteners offer excellent corrosion resistance, high strength-to-weight ratio, and outstanding biocompatibility, making them ideal for critical and demanding applications.
2. Are Titanium Grade 2 fasteners suitable for marine environments?
Yes, they are highly resistant to saltwater corrosion, making them an excellent choice for marine and offshore applications.
3. What standards are followed for manufacturing Titanium Gr 2 fasteners?
Common standards include ASTM B348, ASME SB348, DIN 3.7035, and ISO specifications, depending on the type and application of the fastener.
4. Can Titanium Grade 2 fasteners be customized in terms of size and coating?
Absolutely. They can be manufactured in various sizes, threads, and surface finishes such as passivation, epoxy coating, and mirror buffing, as per project requirements.
5. How do Titanium Grade 2 fasteners compare to stainless steel fasteners?
While both offer corrosion resistance, Titanium Grade 2 is significantly lighter and more resistant to aggressive environments, making it preferable in high-performance and weight-sensitive industries.